Single Over Double Wooden Bunk Bed Storage Stairs

A single sleeping level sits above a double bed in this wooden bunk frame. The staircase and storage cubes make use of the side of the frame, while a hydraulic compartment adds further space below. Lift the slatted platform to reach the storage area beneath the mattress. Allow room for the base to open fully and keep the lifting mechanism clear of loose bedding. The stairs give access to the raised sleeping level and use the side of the frame. Leave an unobstructed approach so the steps can be used as intended. Guardrails border the raised sleeping level. Follow the supplied mattress-depth guidance so the rail remains effective after the mattress is fitted. The wooden components give the sleeping frame its structure. The assembled frame measures approximately 247 x 143 x 155 cm. The mattress size is 90 x 190 cm on the upper level and 135 x 190 cm on the lower level; mattresses are not included. Compare the full outside dimensions with the intended room position rather than relying on the sleeping area alone. The raised level also needs sufficient ceiling clearance and clear access from the stairs or ladder. Assembly is required. Follow the supplied instructions, secure the frame on a level floor and check its fittings before use. Clean the visible pine, plywood surfaces according to the material-specific care advice. Keep bedding clear of the hydraulic lift and check its fittings during regular use. | YMYNY Single Over Double Wooden Bunk Bed with Storage Stairs