3ft Single Wooden Bunk Bed Storage Stairs

The raised single sleeping level frees space for storage in this childrens bunk bed. A staircase, storage cubes and hydraulic storage make use of the wooden frame around it. Lift the slatted platform to reach the storage area beneath the mattress. Allow room for the base to open fully and keep the lifting mechanism clear of loose bedding. The stairs give access to the raised sleeping level and use the side of the frame. Leave an unobstructed approach so the steps can be used as intended. Guardrails border the raised sleeping level. Follow the supplied mattress-depth guidance so the rail remains effective after the mattress is fitted. The wooden components give the sleeping frame its structure. Assemble and position the full bed before placing bedding around any storage opening or access step. The assembled frame measures approximately 243 x 95 x 152 cm. The mattress size is 90 x 190 cm on each of the two levels; mattresses are not included. Compare the full outside dimensions with the intended room position rather than relying on the sleeping area alone. The raised level also needs sufficient ceiling clearance and clear access from the stairs or ladder. Assembly is required. Follow the supplied instructions, secure the frame on a level floor and check its fittings before use. Clean the visible mdf, particle board, plywood surfaces according to the material-specific care advice. Keep bedding clear of the hydraulic lift and check its fittings during regular use. | YMYNY 3ft Single Wooden Bunk Bed with Storage Stairs