3ft Single Sherpa Daybed Trundle Storage & USB

A pull-out single trundle gives this daybed a second sleeping space. A storage cabinet and USB and Type-C ports are fitted to its sherpa finished frame. The lower sleeping section slides out when an additional resting place is required. Measure the room with it both closed and extended, because the usable floor area changes. Shelves or compartments put books and smaller objects within reach of the bed. Check which way these openings face when placing the frame against a wall. The charging point keeps compatible devices close to the sleeping area. Place the bed near a suitable socket and route its cable away from moving parts and walkways. The headboard height can be set around the intended mattress. Secure the selected position during assembly and check the final height against the space available. The assembled frame measures approximately 233 x 95 x 73.5 cm. The mattress size is 90 x 190 cm; mattresses are not included. Compare the full outside dimensions with the intended room position rather than relying on the sleeping area alone. Allow enough space for the trundle in its extended position. Assembly is required. Follow the supplied instructions, secure the frame on a level floor and check its fittings before use. Clean the visible mdf, metal, sherpa surfaces according to the material-specific care advice. Keep the frame clear of adjacent furniture so the bed can be made and maintained easily. | YMYNY 3ft Single Sherpa Daybed with Trundle, Storage & USB in White