3ft Single Linen Daybed Trundle Storage & USB

Pull out the trundle when another sleeping place is needed, then return it beneath the single daybed. Storage and USB and Type-C charging are built into the upholstered frame. The lower sleeping section slides out when an additional resting place is required. Measure the room with it both closed and extended, because the usable floor area changes. Shelves or compartments put books and smaller objects within reach of the bed. Check which way these openings face when placing the frame against a wall. Integrated lighting can be used beside the bed without placing a separate lamp on the floor. Position the frame so its controls and power connection remain accessible. The charging point keeps compatible devices close to the sleeping area. Place the bed near a suitable socket and route its cable away from moving parts and walkways. The assembled frame measures approximately 204 x 107 x 88 cm. The mattress size is 90/180 x 190 cm; mattresses are not included. Compare the full outside dimensions with the intended room position rather than relying on the sleeping area alone. Allow enough space for the trundle in its extended position. Assembly is required. Follow the supplied instructions, secure the frame on a level floor and check its fittings before use. Clean the visible linen, mdf, metal surfaces according to the material-specific care advice. Keep the frame clear of adjacent furniture so the bed can be made and maintained easily. | YMYNY 3ft Single Linen Daybed with Trundle, Storage & USB in Beige