HFC Electronic Speed Controller 6 Amp

The Hydor HFC is a 6 Amp single phase electronic speed controller for 230V AC fans. A rotary dial gives infinitely variable speed from minimum to maximum, and an integral ON/OFF rocker switch starts and stops the fan. It is the correct controller for the Hydor HPA plate axial fan range from 250mm to 500mm, and it also suits the Hydor HCF destratification sweep ceiling fans. It is housed in a compact surface-mounting enclosure with connections for one fan outlet. Single phase, rated up to 6.0 Amp Infinitely variable rotary speed control Integral ON/OFF rocker switch Surface-mounting enclosure, 108 x 108 x 60 mm Controls one fan outlet 230V / 1 phase / 50Hz supply Suitable for Hydor HPA plate axial fans, single phase, 250mm to 500mm Hydor HCF destratification sweep ceiling fans (non-reversing control) Other 230V single phase voltage-controllable fans with a full load current up to 6 Amp The HPA fans are not reversible, so the HFC is the only controller Hydor specify for them. The 630mm HPA needs a larger 10 Amp controller: call us and we will point you to the right one. If you want to reverse a sweep ceiling fan for summer and winter running, you need the separate Hydor reversing controller. Installation Installation must be carried out by a qualified electrician and connected to a suitably rated fused spur. Isolate the mains supply before wiring. Fit the controller in a dry, sheltered position away from heat sources and high humidity, with an ambient temperature no higher than 40°C. Check the fan motor rating plate to confirm the full load current is within 6 Amp. If the fan will not start on the minimum setting, the pre-set potentiometer inside the unit can be adjusted to raise the minimum speed. Specifications Brand Hydor Model HFC6.0 Type Electronic speed controller Maximum load 6.0 Amp Supply 230V / 1 phase / 50Hz Speed control Infinitely variable (rotary dial) Switch Integral ON/OFF rocker Fan outlets 1 Dimensions (H x W x D) 108 x 108 x 60 mm Mounting Surface Max ambient temperature 40°C Warranty 1 year Manuals & Guides Hydor HFC Speed Controller Installation & Maintenance Guide