AT DMC100 ST 30 network media converter Internal 100 Mbit s 1310 nm Multi mode

Wired. 100 Mbit/s 2000 m 1310 nm. Multi-mode ST 50/125,62.5/125 µm. Internal. Grey. This desktop media converter features 100TX to 100FX conversion with multi-mode ST fiber connector supporting a distance up to 2km. At just 1.25 inches wide × 3.6 inches deep × 0.85 inches high, this media converter can easily fit into the palm of a hand.. Network. Duplex system. Full, Half. Auto MDI/MDI-X. Yes. VLAN support. Yes. Packet forwarding rate (1 Gbps). 1488000 pps. Packet forwarding rate (100 Mbps). 148800 pps. Packet forwarding rate (10 Mbps). 14880 pps. Data transfer rate. 100 Mbit/s. Ethernet interface type. Fast Ethernet. Networking standards. IEEE 802.1Q. Converter output interface. 100Base-FX. Converter input interface. 100Base-TX. Maximum data transfer rate. 100 Mbit/s. Performance. Rx power (min). -32 dBmW. Tx power (max). -14 dBmW. Tx power (min). -22.5 dBmW. Fiber cable diameters supported (core/cladding). 50/125,62.5/125 µm. Fiber mode structure. Multi-mode. Wavelength. 1310 nm. Maximum transfer distance. 2000 m. Features. LED indicators. Yes. Product colour. Grey. Internal. Yes. Ports & interfaces. Fiber optic connector. ST. Connectivity technology. Wired. Power. Power consumption (typical). 1.5 W. Weight & dimensions. Weight. 113 g. Height. 21.6 mm. Depth. 91.4 mm. Width. 31.8 mm. Operational conditions. Operating altitude. 0 - 3048 m. Storage relative humidity (H-H). 5 - 95%. Operating relative humidity (H-H). 5 - 95%. Storage temperature (T-T). -15 - 65 °C. Operating temperature (T-T). 0 - 40 °C. leaflet. manual pdf